[Dolphin] Instrument Panel Trim

Elevate your Dolphin’s driving environment with this precision‑fitted instrument panel trim. Designed to overlay the factory dial cluster bezel, it adds a bold, sporty accent that transforms the cockpit in minutes – no wiring, no dismantling, just pure visual impact.

 

🔥 Why You’ll Love It

Sporty Cockpit Upgrade – The high‑gloss carbon fibre weave frames the instrument cluster, drawing the eye to the digital display and giving your Dolphin’s interior a more aggressive, driver‑focused feel. Complements other carbon‑fibre accents throughout the cabin.

Plug‑&‑Play Simplicity – No wiring, no electrical modifications. The trim simply overlays the existing plastic bezel using pre‑applied 3M automotive tape. Installs in under 5 minutes – just clean, align, and press.

Scratch & Wear Protection – Shields the factory cluster surround from dust, fingerprints, and accidental scuffs during cleaning or daily use. Keeps that high‑visibility area looking pristine.

Gloss‑Matched Finish – Deep, glossy clear coat matches the Dolphin’s factory gloss black trim (air vents, centre console, door handles) for a cohesive OEM‑plus look. 

Precision Fit, No Interference – Custom‑moulded using 3D scans of the Dolphin’s instrument panel. All buttons, vents, and the driver display remain fully accessible – no obstruction to visibility or controls.

Durable & Removable – UV‑stabilised ABS resists fading, cracking, and heat. Removes cleanly with a bit of warmth – no residue or damage to the original surface.

Feature	Details
Compatibility	BYD Dolphin (all trims, 2022–present)
Material	High‑grade ABS plastic (UV‑stabilised, impact‑resistant)
Finish	High‑gloss carbon fibre pattern with UV‑resistant clear coat
Installation	Pre‑applied 3M™ automotive‑grade adhesive tape; clean, align, press – no tools, drilling, or permanent modifications
Cover Dimensions	Custom contoured to OEM console shape
Weight	0.28 kg (approx. 280g)
Adhesive Type	3M™ 9448A double‑sided acrylic foam tape (temperature‑resistant, strong bond)
Temperature Range	-30°C to +85°C
Installation Time	5–10 minutes
Cure Time	24 hours for full bond strength
Warranty	1 year against manufacturing defects and adhesive failure

• Clean the surface thoroughly with the provided wipe.

• Dry completely – no moisture or wax.

• Position the cover, mark the alignment with tape.

• Peel adhesive backing, press firmly for 30 seconds.

Q: Does this fit my BYD Dolphin?
A: Yes this is for HK version cars – it’s custom‑molded specifically for the BYD Dolphin (all trims, 2022–present). 

Q: Will it affect the wireless charging pad or any buttons?
A: No. The cover is just 1.2 mm thick and follows the original console contours. All buttons, cup holders, and the wireless charging area remain fully accessible and functional.

Q: Is it real carbon fiber?
A: It’s a high‑quality hydro‑dipped ABS with a durable UV‑resistant clear coat – giving you the look and feel of carbon fiber with better durability and a much lower price. No yellowing or fading over time.

Q: How hard is it to install?
A: Very easy. Clean the console surface with the included alcohol pad, dry‑fit to check alignment, then peel the 3M tape backing and press into place. No drilling, no tools, no permanent changes. Takes about 10 minutes.

Q: Can I remove it later without damaging my console?
A: Yes. Gently warm the cover with a hair dryer and use a plastic pry tool to lift it. Any leftover adhesive residue can be rolled off or cleaned with isopropyl alcohol – the original surface will be unharmed.

Q: How do I clean and maintain it?
A: Wipe with a soft microfiber cloth and a mild interior cleaner. Avoid abrasive sponges, strong solvents, or automatic car wash brushes that could scratch the glossy finish.

Q: What if the adhesive doesn’t hold?
A: We pre‑apply genuine 3M automotive tape. If you experience any issues, we offer a 1‑year warranty against adhesive defects – contact us for a replacement kit or further support.